![background image](http://html1.mh-extra.com/html/gmc/s-series-1994/s-series-1994_repair-manual_2235929077.webp)
❖
Disassemble
1.
Adjuster lock nut (8).
2.
Bolts (10).
•
Rotate stub shaft (40), using a 12-point socket,
to center gear.
3.
Side cover (7), gasket (11), and pitman shaft (12) as
an assembly.
4.
Pitman shaft (12) from the side cover (7).
*
Assemble
Notice:
See “Notice” on page 3B1 A-l of this section.
1.
Pitman shaft (12) to side cover (7) by screwing
pitman shaft (12) in until it fully seats to side
cover (7).
2.
Adjuster lock nut (8).
•
Do not tighten adjuster lock nut (8) until after
pitman shaft adjustment has been made.
3.
Gasket (11) to side cover (7) and bend tabs around
edges of side cover (7).
4.
Pitman shaft assembly and side cover (7) to
housing (20).
5.
Bolts (10).
3 ) Tighten
•
Bolts (10) to 60 N-m (44 lb. ft.).
Adjust
•
Pitman shaft.
Refer to “Pitman Shaft
Over-Center Preload Adjustment” in this
section.
*
+1 Install or Connect
•
Steering gear. Refer to “Power Steering Gear
Replacement” in Section 3B.
HOUSING END PLUG REPLACEMENT
Figure 10
Remove or Disconnect
Steering gear from vehicle. Refer to “Power
Steering Gear Replacement” in Section 3B.
|4j4j Disassemble
•
Rotate stub shaft back and forth to drain fluid.
1.
Retaining ring (1) by using a punch inserted into the
housing access hole to unseat it.
2. Plug (2).
3.
O-ring seal (3).
*
Assemble
Lubricate O-ring seal with power steering fluid.
1.
O-ring seal (3) into housing (20).
2. Plug (2).
3.
Retaining Ring (1).
•
Install retaining ring (1) so that open end is
approximately 25 mm (1 inch) from access
hole in housing (20).
Install or Connect
Steering gear. Refer to “Power Steering Gear
Replacement” in Section 3B.
Summary of Contents for S Series 1994
