![background image](http://html1.mh-extra.com/html/gmc/s-series-1994/s-series-1994_repair-manual_2235929420.webp)
27. Gasket
82. Nut
28. Reinforcement
83. Bolt
29. Oil Pan
84. Stud
V0509
Figure 11— Oil Pan and Components
O IL PUMP REMOVAL
Remove or Disconnect (Figure 12)
1. Bolt (31), oil pump to main bearing cap.
2. Complete oil pump assembly (30).
3. Shaft extension (32) and retainer (33).
FLYWHEEL REMOVAL
«-+
Remove or Disconnect
1. Flywheel bolts.
2. Flywheel.
FRONT COVER REMOVAL
Remove or Disconnect
1. Front cover bolts.
2. Front cover.
3. Front cover gasket.
30. Pump Assembly
31. Bolt
32. Shaft Extension
33. Retainer
V0510
Figure 12— Oil Pump and Components
TIM IN G CHAIN AND CAMSHAFT
SPROCKET REMOVAL
B
Remove or Disconnect (Figure 13)
• Check timing chain free play. If the timing chain
(41) can be moved back and forth in excess of 16
mm (5/8 inch), make a note that the timing chain
(41) should be replaced during assembly.
1. Camshaft sprocket bolts (39) and nut (34).
2. Cam shaft sprocket (40) and tim ing chain (41)
together.
• The sprocket has a light interference fit on the
camshaft. Tap the sprocket on its lower edge to
loosen it.
CAMSHAFT REMOVAL
Remove or Disconnect (Figures 13 through 15)
Tool Required:
J 5825-A Crankshaft Gear Remover
1. Balance shaft drive gear stud (35).
2. Balance shaft drive gear (37).
3. C ra n ksh a ft s p ro c k e t (38), if necessary. Use
J 5825-A (figure 14).
4. Camshaft retainer bolts and camshaft retainer.
5. Camshaft.
A. Install three 5/16-18 inch bolts 100-125 mm
(4-5 inches) long into the camshafts threaded
holes. Use these bolts to handle the camshaft
(figure 15).
Summary of Contents for S Series 1994
