![background image](http://html1.mh-extra.com/html/gmc/s-series-1994/s-series-1994_repair-manual_2235929211.webp)
ASSEMBLY OF THE AXLE
D IFFER EN TIA L CASE ASSEMBLY
-H -
Install or Connect (Figures 1, 2 and 16)
PIN IO N BEARING
CUP INSTALLATION
Tool Required:
J 33790 Side Bearing Installer
1. Thrust washers (53) and side gears (54) into the
differential case (35).
• If the original gears and washers are being
reused, install them on the same side from
which they were removed.
2. Pinion gears (56).
• Position one pinion gear (56) between the side
gears and rotate the gears until the pinion gear
is directly opposite the opening in the case.
• Place the other pinion gear between the side
gears, making sure the hole in both pinion
gears line up.
3. Thrust washers (55).
• Rotate the pinion gears toward the opening
enough to permit the sliding in of the thrust
washers.
4. Shaft (52) and bolt (36).
5. Ring gear (37) onto the differential case (35).
NOTICE: Refer to “Notice” on page 4C1-1.
Install or Connect (Figures 1, 2, 17 and 18)
Tool Required:
J 33837 Pinion Bearing Remover and Installer
1. Bearing (41) into the case using J 33837-1,
J 33837-3, and J 33837-4 (figure 17).
2. Bearing (39) into the case using J 33837-1,
J 33837-3, and J 33837-4 (figure 18).
PINIO N DEPTH A D JU STM EN T
Tools Required
J 33838 Pinion Depth Setting Gage
J 29763 Dial Indicator
1. Pinion depth is adjusted by selecting a shim (38) of
the proper thickness.
2. Lubricate the inner and outer pinion bearings liber
ally with axle lubricant.
3. Hold the pinion bearings in position and install
J 33838 and J 29763 (figure 19).
J 33837-3
V
•
Important
Always install new bolts. Never reuse the old
bolts.
Tighten
• Bolts (34) in progressive steps to 80 N-m (60
lbs. ft.).
7. Side bearings (33), using J 33790 (figure 16).
J 33837-1
J 33837-4
F1786
Summary of Contents for S Series 1994
