Figure 7— Removing the Pinion Flange
• Thrust washers for wear.
• The fit of the side gears in the differential case.
• The fit of the side gears on the axle shafts.
• Differential case for cracks and scoring.
• Replace all worn parts.
PINION AND RING GEAR
L*
Inspect
• Pinion and ring gear teeth for cracking, chipping,
scoring, or excessive wear.
• Pinion gear splines for wear.
• Pinion flange splines for wear.
• The fit of the pinion gear on the pinion flange.
• The sealing surface of the pinion flange for nicks,
burrs, or rough tool marks that would cause dam
age to the seal’s inside diameter and result in an
oil leak.
• Replace all worn or broken parts.
— Ring and pinion gears are matched sets and
both must be replaced any time a replacement
of either is necessary.
Figure 8— Removing the Drive Pinion
Figure 9— Removing the Pinion Rear Bearing
Important
• A new pinion flange must be replaced when
ring gear and pinion gear are replaced to main
tain proper system balance.
BEARINGS
L *
Inspect
• Bearings visually and by feel.
• The bearings should feel smooth when oiled
and rotated while applying as much hand pres
sure as possible.
The large end of the bearing rollers for wear. This
is where tapered roller bearing wear is most evi
dent.
Bearing cups for wear, cracks, brinelling, and scor
ing.
Bearings and cups are replaced only as sets.
• If the axle was operated for an extended period
of time with very loose bearings, the ring gear
and drive pinion will also require replacement.
• Low mileage bearings may have very small
scratches and pits on the rollers and bearing
cups from the initial preload. Do not replace a
bearing for this reason.
• Bearing caps for cracks or chips.
Summary of Contents for S Series 1994
