![background image](http://html1.mh-extra.com/html/gmc/s-series-1994/s-series-1994_repair-manual_2235929293.webp)
D. Apply force in a clockwise direction to lock the
front and rear housings.
E. Back off the fixture screw.
F. Stake housing at two tabs 180 degrees apart
(figure 13).
Notice: Do not stake a tab that has previous
ly been staked. The tab may break at a later
time and system failure may occur.
•
Assembly can be aided by connecting a vacu
um source to the booster.
25. Lubricate inside and outside diameters of grommet
(4) and front housing seal (7) with a thin layer of
Delco Silicone Lube (GM P/N 18010909) or equiva
lent.
26. Grommet (4) and vacuum check valve (3).
27. Front housing seal (7).
28. Silencer (2) and boot (1).
GAGING PROCEDURE
Tool Required:
J 37839 Push Rod Height Gage
• Gage the piston rod using J 37839 (figure 14).
A. Apply 85.0 kPa (25 In. Hg.) vacuum or maxi
mum engine vacuum to the booster.
Figure 14— Gaging the Piston Rod
B. Check the maximum and minimum rod length.
• If the piston rod is not within limits, obtain a
service adjustable piston rod and adjust the
rod to the correct measurement.
SPECIAL TOOLS
J 37839
J 28458
J 23456
J 29282
1. POWER BRAKE PUSH ROD HEIGHT GAGE
2. POWER BRAKE BOOSTER DISASSEMBLY AND
REASSEMBLY TOOL
3. POWER PISTON SEAL PROTECTOR
4. AIR VALVE PUSH ROD RETAINER INSTALLER
V3763
Summary of Contents for S Series 1994
