![background image](http://html1.mh-extra.com/html/gmc/s-series-1994/s-series-1994_repair-manual_2235929438.webp)
u
Q
ENGINE UEFT
ENGINE HtONT
ENGINE RIGHT ^
A. Oil Ring Rail Gaps
B. 2nd Compression Ring Gap
G Notch In Piston
0. Oil Ring Spacer Gap
(Tang In Hole Or Slot With Arc)
E. Top Compression Ring Gap
B7895
Figure 43— Piston Ring End Gap Locations
J 8037
V0529
Figure 44— Installing Piston
D. The piston must be installed so that the notch
in the piston faces the front of the engine (fig
ure 43).
E. Place the piston in its matching bore. The con
necting rod bearing tang slots must be on the
side opposite the camshaft. Using light blows
with a hammer handle, tap the piston down into
its bore (figure 44). At the same time, from
beneath the engine, guide the connecting rod to
Figure 46— Measuring Connecting Rod Side
Clearance
the crankpin with J 5239 (figure 45). Hold the
ring compressor against the block until all rings
have entered the cylinder bore.
F. Remove J 5239 from the connecting rod bolts.
Important
Each connecting rod and bearing cap should be
marked, beginning at the front of the engine.
Cylinders 1, 3, and 5 are the right bank and 2,
4, and
6
are the left bank (when viewed from
the front). The numbers on the connecting rod
and bearing cap must be on the same side
when installed in the cylinder bore. If a connect
ing rod is ever transposed from one block or
cylinder to another, new connecting rod bear
ings should be fitted and the connecting rod
should be numbered to correspond with the
new cylinder number.
Summary of Contents for S Series 1994
