![background image](http://html1.mh-extra.com/html/gmc/s-series-1994/s-series-1994_repair-manual_2235929742.webp)
Assemble
•
Control valve assembly components exactly as
shown. Notice the position of the valve lands
and bushing passages.
Control Valve Assembly and Accumulator
Housing
F ig u re s
77
a n d 8 0
Tool Required:
Guide Pin J 25025-5
Assemble
1. Gasket (45) valve body to spacer plate.
2. Spacer plate (46).
3. Gasket (47) accumulator housing to spacer plate.
4. Guide pin J 25025-5 into valve body. Located at
back bolt hole of detent spring and roller
assembly bolt hole.
5. Accumulator housing assembly (51) onto valve
body assembly (44).
6. Five bolts (53) using (8 mm) socket and one
long bolt (52) through accumulator housing into
valve body assembly.
NOTE:
Start accumulator housing bolts finger tight
starting with bolt (52) and work towards opposite
end. Tighten sequence Figure 79.
| ^ | Tighten
• Bolts (52 and 53) to 11 N*m (97 lb. in.)
7. Remove guide pin J 25025-5.
P A C E C V T C M C I A M A C C C M D I V
VnOL LA I LIHUIVU nUULIVIUL. I
F ig u re 81
[ y | Inspect
1. Bearings (17), bushing (13) and O-ring (15) for:
• Wear.
• Damage.
SPEED SENSOR ASSEMBLIES
F ig u re 8 2
[ y | Inspect
•
Speed Sensor Assemblies (22) for:
- Evidence of damage.
GUIDE
PIN
___________________________________________________ RH0174-4L80-E
Figure 80 Torque Sequence and Guide Pin Location
12
CUP, ORIFICE W/SEAL/PLUG-REAR LUBE (4WD)
13
SEAL ASSEMBLY, REAR LUBE
14
RING, SNAP SEAL RETAINER
15
SEAL, EXTENSION TO CASE
19
EXTENSION ASSEMBLY, CASE
20
HELIX SEAL ASSEMBLY, CASE EXTENSION
21
BOLT, HEX HD - M 1 0 X 1.5 X 30.0
675 SEAL, O-RING OUTPUT SHAFT
RH0109-4L80-E
Summary of Contents for S Series 1994
