190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
413
Hazard avoidance
SY
ST
eM
o
ver
vie
W
FL
iGHT
in
ST
rUM
en
TS
ei
S
aU
dio
&
cn
S
FL
iGHT
M
ana
G
eM
en
T
Hazard
av
oid
ance
a
Fc
S
addi
Tiona
L
Fea
TU
re
S
a
PP
endice
S
inde
X
The system shows TAWS information on the TAWS Pane, the Navigation Map Pane, and on the PFD Inset
Navigation Map.
Enabling/disabling relative terrain information (Navigation Map Pane):
1)
From Home, touch
Map
>
Map Settings
.
2)
If necessary, touch the Sensor Tab.
3)
Touch the
Relative Terrain
Button to display/remove relative terrain information on the Navigation Map Pane.
Enabling/Disabling obstacle information (Navigation Maps)
1)
From Home, touch
Map > Map Settings
.
2)
If necessary, touch the Land Tab.
3)
Touch the
Obstacle Data
Button to enable/disable obstacle data.
The system can overlay terrain and obstacle data on the PFD Inset Navigation Map. If the Inset Map is
currently displaying the traffic map (Traffic Map Softkey annunciator is green), the traffic map must first be
disabled in order to view the PFD Inset Navigation Map.
Displaying terrain information (PFD Inset Navigation Map)
1)
Press the
Inset Map Settings
Softkey.
2)
Press the
Terrain
Softkey. Softkey annunciator is green when terrain display is enabled, and gray when terrain
is disabled.
When the pilot enables TAWS information on maps other than the TAWS Pane, an icon indicates the feature
is enabled for display. A legend for TAWS terrain colors accompanies the icon on the Navigation Map Panes
(Figure 6-90). The legend is shown without the terrain icon on the TAWS Pane.
Figure 6-90 Terrain Icon and Legend
The Map Settings on the Touchscreen Controller enables adjustment of map range settings above which the
system declutters terrain and obstacle data from the display. If the pilot selects a map range larger than the map
range setting, the system removes the data from the map. For terrain data, the enable/disable function applies
only to the Display Panes, while the range setting also affects the PFD Inset Navigation Map.
The system can display terrain data independently from obstacle data; however, the system will display
obstacles for which cautions or warnings exist when terrain is enabled for display and the map range is within
the setting limit.
Maps besides the TAWS Pane use settings based on those selected for the Map Options Screen on the
Touchscreen Controller. The maximum display ranges for obstacles on each map are dependent on the range
setting made for the navigation maps. If the maximum range for obstacle display on the navigation maps is
This manual downloaded from http://www.manualowl.com