Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-01 Rev. A
244
Flight ManageMent
SY
Ste
M
O
Ve
RV
ie
W
Flight
in
St
RUM
ent
S
ei
S
aUD
iO P
anel
& C
n
S
Flight
M
ana
ge
M
ent
ha
Za
RD
aV
O
iD
an
Ce
a
FCS
a
DD
iti
O
nal
Fea
tUR
eS
a
PP
en
D
iC
eS
in
D
eX
The following could cause the airway update to fail:
• Airway identifier, entry waypoint or exit waypoint not found in the new database.
• Airway entry/exit waypoint is not an acceptable waypoint for the airway – either the waypoint is no longer on
the airway, or there is a new directional restriction that prevents it being used.
• Loading the new airway sequence would exceed the capacity of the flight plan.
Flight plan creation
There are four places to create, modify, or view a flight plan:
• Active Flight Plan Screen on the Touchscreen Controller (create/modify the active flight plan)
• Flight Plan Catalog Screen on the Touchscreen Controller (create/modify a stored flight plan)
• Flight Plan Window on the PFD (create/modify the active flight plan)
• Active Flight Plan Inset Window (view the active flight plan)
Figure 5-83 Active Flight Plan Screen
Direct To (
¯
) Button
Departure Identifier Button
PROC
Button
VNAV
Button
Flight Plan Options
Button
Waypoint Selection Button
Bearing/Distance to Waypoint
Active Flight Plan Leg
Enroute
Button
VNAV Altitude Button
Flight Plan Name
Figure 5-84 Flight Plan Catalog Screen
Stored Flight Plan Options Button
Number of Available Storage Spots
Destination Airport Identifier/Symbol
Cumulative Flight Plan Distance
Flight Plan Enroute Safe Altitude
Create New Catalog Flight Plan
Button
Number of Flight Plans Stored
Departure Airport Identifier/Symbol
This manual downloaded from http://www.manualowl.com
