190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
241
Flight ManageMent
SY
Ste
M
O
Ve
RV
ie
W
Flight
in
St
RUM
ent
S
ei
S
aUD
iO P
anel
& C
n
S
Flight
M
ana
ge
M
ent
ha
Za
RD
aV
O
iD
an
Ce
a
FCS
a
DD
iti
O
nal
Fea
tUR
eS
a
PP
en
D
iC
eS
in
D
eX
Figure 5-81 Direct To - Selecting a Manual Course
Course
Selection
Using Touchscreen Controller
Using GDU Controller on PFD
Reselecting the direct course from the current position:
1)
From
Home
, touch
Direct To.
2)
Touch the
Activate
¯
Button to activate the direct-to using the direct course.
Or:
1)
On the GDU Controller, press the
¯
Button to display the Direct To Window.
2)
Press the
ENT
Key or the small
PFD
Knob to accept the selection and move the cursor to the
ACTIVATE?
field.
3)
Press the
ENT
Key or the small
PFD
Knob to activate the direct-to using the direct course.
A direct-to with altitude constraints creates a descent path (and provides guidance to stay on the path) from
the aircraft’s current altitude to the altitude of the direct-to waypoint. The altitude is reached at the waypoint, or
at the specified distance along the flight path if an offset distance has been entered. All VNAV altitudes prior to
the direct-to destination are removed from the active flight plan upon successful activation of the direct-to. All
VNAV altitudes following the direct-to waypoint are retained. See the section on Vertical Navigation for more
information regarding the use and purpose of VNAV altitudes and offset distances.
Entering a VNAV altitude and along-track offset for the waypoint:
1)
From
Home
, touch
Direct To.
2)
Touch the
VNAV Altitude
Button to display the keypad.
3)
Use the keypad to select the altitude.
4)
Touch the
Enter
Button to accept the altitude, and and return to the Direct To Screen.
5)
Touch the
VNAV Offset
Button to display the keypad.
6)
Touch the
(Before) -
Button or the
(After) +
Button, if necessary.
7)
Use the keypad to select the offset distance.
8)
Touch the
Enter
Button to accept the offset distance, and and return to the Direct To Screen.
9)
Touch the
Activate
¯
Button to activate the direct-to using the VNAV constraints.
Or:
This manual downloaded from http://www.manualowl.com
