Garmin G2000 Pilot'S Manual Download

Page: 366 / 624

Garmin G2000 Pilot’s Guide for the Cessna T240

190-01263-01 Rev. A

352

Hazard avoidance

ver

vie

iGHT

rUM

Udio

iGHT

ana

Hazard

oid

ance

addi

Tiona

Fea

endice

inde

Figure 6-19 Panning on the SiriusXM Weather Pane

Airport with

METAR Flag

Selected with

Map Pointer

Original METAR Text

Showing METAR text (SiriusXM Weather Pane):

From Home, touch

Weather > Weather Selection > SiriusXM Weather > SiriusXM Settings

Touch the

METARs

Button in the Overlays window. The system displays METAR flags at available reporting

stations when METARs are enabled (button annunciator is green).

To view METAR text, press the Joystick and move the map pointer with the Joystick over a METAR reporting
station.

Touch the

Legend

Button on the SiriusXM Weather Settings Screen to display weather legend(s) for weather

product(s) enabled on the SiriusXM Weather Pane. Scroll as necessary to view the information, then touch

Back

Home

Showing METAR text (Navigation Map Pane):

From Home, touch

Map > Map Settings

If necessary, touch the Sensor Tab.

If necessary, scroll to and touch the

WX Source

Button, then touch the

SiriusXM

Button.

Scroll as needed and touch the

Graphical

METARs

Button in the Overlays window.

Textual METAR information is also available on the Airport Information screens on the Touchscreen

Controllers. When viewing the Airport Information screen for an airport, touch the Weather Tab and scroll
as needed to view the METAR text.

This manual downloaded from http://www.manualowl.com

Summary of Contents for G2000

















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G2000

Reviews:

Related manuals for G2000

Brands by name

Popular brands

Garmin G2000, Pilot'S Manual

Search results

Summary of Contents for G2000

Reviews:

Related manuals for G2000

Brands by name

Popular brands