Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-01 Rev. A
190
Flight ManageMent
SY
Ste
M
O
Ve
RV
ie
W
Flight
in
St
RUM
ent
S
ei
S
aUD
iO P
anel
& C
n
S
Flight
M
ana
ge
M
ent
ha
Za
RD
aV
O
iD
an
Ce
a
FCS
a
DD
iti
O
nal
Fea
tUR
eS
a
PP
en
D
iC
eS
in
D
eX
Figure 5-15 PFD Inset Map - Topographic Data
Topo Data Off
Topo Disabled
Topo Data On
Topo Enabled
Displaying/removing topographic data from the PFD Inset Map:
1)
Press the
Inset Map Settings
Softkey on the PFD.
2)
Press the
Topo
Softkey to display/remove topographic data on the Inset Map. When the annunciator on the
button is green, topographical data is displayed. When the annunciator is gray, topographic data is removed,
and navigation data is presented on a black background.
3)
Press the
Back
Softkey to return to the top level softkeys.
The topographic data range is the maximum map range on which topographic data is displayed.
note:
Since the PFD Inset Map is much smaller than the MFD navigation maps, items are removed on the
PFD Inset Map one range level less than the range selected on the Map Options screen (e.g., a setting of 100
nm removes the item at ranges above 100 nm on MFD navigation maps, while the PFD Inset Map removes
the same item at 75 nm).
Selecting a topographical data range:
1)
From
Home
, touch
Map
>
Map Settings.
2)
Touch the
Land
Tab, if necessary.
3)
Scroll the list to find the Topo Data
Settings
Button, if necessary.
4)
Touch the Topo Data
Settings
Button to display the Topo Data Settings Screen.
5)
Touch the
Topo Data
Button to display the Map Topo Range list.
6)
Scroll the list if necessary to find the desired range, and touch the range button.
This manual downloaded from http://www.manualowl.com
