190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
491
AdditionAl FeAtures
sY
ste
M
o
Ver
Vie
W
Fli
GH
t
instru
M
ents
eis
Audio
P
A
nel
& C
ns
Fli
GH
t
MA
n
AG
eM
ent
HAZA
rd
AV
oid
A
n
Ce
AFC
s
A
ddition
A
l
Fe
Atures
APP
endi
Ces
inde
X
chArt Selection
When a flight plan is active, or when flying direct-to a destination, the initial set of charts made available
pertain to the departure airport. After departing the airport environment, the initial chart set made available
pertains to the destination airport. When no flight plan is active, or when not flying to a direct-to destination,
the initial chart set is made available for the nearest airport.
Selecting Charts using the Charts Screen:
1)
From the
Home
Screen, touch
Charts
.
2)
The airport for which charts will be displayed is shown at the top of the Charts Screen. Touch the Airport Button
to enter another airport.
3)
Touch the
Info
Tab to display the airport information selection buttons for the selected airport (Figure 8-7).
•
Departure
Tab to display a list of possible departures for the selected airport.
•
Arrival
Tab to display a list of possible arrivals for the selected airport.
•
Approach
Tab to display a list of possible approaches for the selected airport.
4)
Touch the desired information button in any of these lists to display the applicable chart on the MFD.
Figure 8-7 Airport Diagram Selection
Figure 8-8 Airport Diagram View Options
5)
Touch the
Charts Options
Button to select the desired display option for the selected chart (Figure 8-8).
6)
Touch
All
to display the complete Airport Diagram.
Fit Width
displays the full width of the Airport Diagram.
Plan
displays only the diagram portion of the chart.
Minimums
displays only the approach minimums on an approach
chart.
Profile
displays only the descent profile on the approach chart.
Header
displays the chart heading. Only
appropriate views are available for the selected chart.
7)
Touch
Back
to return to the Charts Screen.
This manual downloaded from http://www.manualowl.com