Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-01 Rev. A
290
Flight ManageMent
SY
Ste
M
O
Ve
RV
ie
W
Flight
in
St
RUM
ent
S
ei
S
aUD
iO P
anel
& C
n
S
Flight
M
ana
ge
M
ent
ha
Za
RD
aV
O
iD
an
Ce
a
FCS
a
DD
iti
O
nal
Fea
tUR
eS
a
PP
en
D
iC
eS
in
D
eX
Figure 5-144 Loading a Departure into the Active Flight Plan on the PFD
Viewing available procedures at an airport:
1)
From
Home
, touch
Waypoint Info
>
Airport
2)
If necessary, touch the
Airport
Button to display the keypad and use it to select the airport.
3)
Touch the
Proc
Tab to display the Airport Procedures Screen.
4)
Scroll the list if necessary and touch a procedure selection button. The procedure selection screen is displayed
for the selected procedure.
5)
Touch the
Preview
Button, then the
Show on Map
Button to show the preview of the procedure.
6)
Touch the
Back
Button to return to the Airport Procedures Screen to view another procedure.
7)
Repeat steps 4 - 6 as necessary.
REMOVING A DEPARTURE FROM THE ACTIVE FLIGHT PLAN
When plans change while flying IFR, departures can be easily removed from the Active Flight Plan.
Removing a departure from the active flight plan using the Touchscreen Controller:
1)
From
Home
, touch
PROC
2)
Touch the
Departure
Button to display the Departure Selection Screen.
3)
Touch the
Remove
Button. A ‘Remove departure?’ window is displayed.
4)
Touch the
yes
Button. The departure is removed from the active flight plan. To cancel the request, touch the
No
Button.
Removing a departure from the active flight plan using the GDU Controller:
1)
Press the
PROC
Key to display the Procedures Window on the PFD.
2)
Press the
PFD
Knob, and turn to highlight the departure header in the active flight plan.
3)
Press the
CLR
Key. A confirmation window is displayed listing the departure procedure.
4)
With ‘OK’ highlighted, press the
ENT
Key or the small
PFD
Knob. To cancel the removal request, highlight
‘CANCEL’ and press the
ENT
Key or the small
PFD
Knob.
This manual downloaded from http://www.manualowl.com
