190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
157
Audio And CnS
SY
STEM
o
VER
ViEW
FL
iGHT
in
STR
uME
n
TS
EiS
Audio
& C
n
S
FL
iGHT
MA
n
AGEME
n
T
HAZAR
d
AV
oid
A
n
CE
AFCS
A
ddi
Tion
AL
FEA
Tu
RES
APPE
ndi
CES
ind
EX
entering A trAnSponder code
Entering a transponder code with the keypad:
1)
Touch the Transponder Mode Button to display the Transponder Screen.
2)
Use the keypad to select the desired code.
3)
Touch the
Enter
Button to enter the new code, or wait approximately two seconds for automatic entry.
Figure 4-43 Transponder Code Entry
Transponder Code Entry
VFR
Button
Entering a transponder code with the knobs:
1)
Touch the Transponder Mode Button to display the Transponder Screen.
2)
Turn the large right knob one click either way to place the editing cursor on the first digit of the existing code.
3)
Turn the small right knob to enter the first digit.
4)
Turn the large right knob to move the cursor to the next digit.
5)
Turn the small right knob to enter the next digit, repeat steps 4 and 5 until complete.
6)
Touch the
Enter
Button, or push the small right knob, to enter the new code.
Or:
1)
Touch the Transponder Mode Button to display the Transponder Screen.
2)
Turn the small right knob one click either way to erase the previous code and place the editing cursor on the first
digit.
3)
Turn the small right knob to enter the first digit.
4)
Turn the large right knob to move the cursor to the next digit.
5)
Turn the small right knob to enter the next digit, repeat steps 4 and 5 until complete.
6)
Touch the
Enter
Button, or push the small right knob, to enter the new code.
Pressing the
Cancel
Button before code entry is complete cancels code entry and restores the previous code.
This manual downloaded from http://www.manualowl.com
