190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
295
Flight ManageMent
SY
Ste
M
O
Ve
RV
ie
W
Flight
in
St
RUM
ent
S
ei
S
aUD
iO P
anel
& C
n
S
Flight
M
ana
ge
M
ent
ha
Za
RD
aV
O
iD
an
Ce
a
FCS
a
DD
iti
O
nal
Fea
tUR
eS
a
PP
en
D
iC
eS
in
D
eX
LOADING AN APPROACH INTO THE ACTIVE FLIGHT PLAN
Loading an approach into the active flight plan using the Touchscreen Controller:
1)
From
Home
, touch
PROC
2)
Touch the
Approach
Button to display the Approach Selection Screen.
3)
Select the airport and approach:
a)
If necessary, touch the
Airport
Button to display the keypad and use it to select the approach airport.
b)
Touch the
Enter
Button to accept the approach airport.
c)
If necessary, touch the
Approach
Button to display the Select Approach Screen with a list of available
approaches.
d)
Scroll the list if necessary and touch an approach selection button to select the approach.
Or:
a)
If the
SBAS
Button is available , touch the
SBAS
Button to display the keypad and use it to select the SBAS
channel number (The SBAS channel button is only available when an LP, LPV, or no approach is selected).
If the
SBAS
Button is not available , touch the
Approach
Button to display the Select Approach Screen, scroll
to the bottom of the list, touch the
Select by SBAS Channel
Button to display the keypad, and use it to select
the SBAS channel number
b)
Touch the
Enter
Button to accept the SBAS channel and return to the Approach Selection Screen with the
airport and approach selected.
4)
If necessary, touch the
Transition
Button to display the Select Transition Screen with a list of available transitions.
5)
Scroll the list if necessary and touch a transition selection button to select the transition.
6)
To set the minimums, touch the
Minimums
Button to display the Minimums Screen. If the minimums were Off,
then Baro is automatically selected.
a)
If Baro is desired, use the keypad to select the barometric minimum altitude.
b)
Touch the
Enter
Button to accept the barometric minimum altitude and return to the Approach Selection
Screen.
Or:
a)
If temperature compensated minimum is desired, touch the
Minimums
Button to display the Minimums Source
Window.
b)
Touch the
Temp Comp
Button to select temperature compensated minimums and return to the Minimums
Screen.
c)
Use the numeric keypad to select the destination temperature.
d)
Touch the
Enter
Button to accept the destination temperature and return to the Minimums Screen.
e)
Use the keypad to select the minimums altitude.
f)
Touch the
Enter
Button to accept the temperature compensated minimums and return to the Approach Selection
Screen.
7)
Touch the
Preview
Button, then the
Show on Map
Button to show the preview of the approach.
8)
Touch the
Load
Button to insert the approach into the active flight plan.
This manual downloaded from http://www.manualowl.com