190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
141
Audio And CnS
SY
STEM
o
VER
ViEW
FL
iGHT
in
STR
uME
n
TS
EiS
Audio
& C
n
S
FL
iGHT
MA
n
AGEME
n
T
HAZAR
d
AV
oid
A
n
CE
AFCS
A
ddi
Tion
AL
FEA
Tu
RES
APPE
ndi
CES
ind
EX
Selecting a NAV frequency using the GDU Controller:
1)
On the GDU Controller, press the
COM/NAV
Button to display the COM/NAV Window.
2)
Turn the large
PFD
Knob to move the cursor to the
SOURCE
field.
3)
Turn either
PFD
Knob to select the desired NAV.
4)
Press the
ENT
Key or the small
PFD
Knob to accept the selection and move the cursor to the
STBY
frequency
field.
5)
Turn the small
PFD
Knob one click to activate the editing cursor (flashing).
6)
Turn the large and small
PFD
knobs to tune the frequency (Large knob increases/decreases MHz; Small knob
increases/decreases kHz)
7)
Press the
ENT
Key or the small
PFD
Knob to accept the selection and move the cursor to the
XFER?
field.
8)
Press the
ENT
Key or the small
PFD
Knob to transfer the standby frequency to the active frequency.
Figure 4-21 Frequency Tuning from the GDU Controller
This manual downloaded from http://www.manualowl.com
