190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
557
Appendix A
System Message
Comments
PFD1 BACKLIGHt
CALIBRAtIoN
– calibration
lost. Return for repair.
The PFD and/or MFD backlight calibration cannot be found or is invalid. The system should be
serviced.
MFD1 BACKLIGHt
CALIBRAtIoN
– calibration
lost. Return for repair.
PFD1 KeYStK
– PFD1 [key
name] is stuck.
A key is stuck on the PFD and/or MFD bezel. Attempt to free the stuck key by pressing it several
times. The system should be serviced if the problem persists.
MFD1 KeYStK
– MFD1 [key
name] is stuck.
CNFG MoDULe
– PFD1
configuration module is
inoperative.
The PFD1 configuration module backup memory has failed. The system should be serviced.
PFD1 VoLtAGe
– PFD1 has low
voltage. Reducing power usage
The PFD1 voltage is low. The system should be serviced.
MFD1 VoLtAGe
– MFD1 has
low voltage. Reducing power
usage
The MFD voltage is low. The system should be serviced.
PFD1
CARD1 ReM
– PFD1 card
1 was removed. Reinsert card.
The SD card was removed from the top card slot of the specified GDU. The SD card needs to be
reinserted.
PFD1
CARD2 ReM
– PFD1 card
2 was removed. Reinsert card.
PFD1 CARD3 ReM
– PFD1 card
3 was removed. Reinsert card.
MFD1
CARD1 ReM
– MFD1
card 1 was removed. Reinsert
card.
The SD card was removed from the top card slot of the GDU. The SD card needs to be reinserted.
MFD1
CARD2 ReM
– MFD1
card 2 was removed. Reinsert
card.
MFD1 CARD3 ReM
– MFD1
card 3 was removed. Reinsert
card.
PFD1
CARD1 eRR
– PFD1 card
1 is invalid.
The SD card in the top card slot of the specified GDU is invalid.
PFD1
CARD2 eRR
– PFD1 card
2 is invalid.
PFD1 CARD3 eRR
– PFD1 card
3 is invalid.
MFD1
CARD1 eRR
– MFD1
card 1 is invalid.
The SD card in the top card slot of the GDU is invalid.
MFD1
CARD2 eRR
– MFD1
card 2 is invalid.
MFD1 CARD3 eRR
– MFD1
card 3 is invalid.
This manual downloaded from http://www.manualowl.com