190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
109
EnginE indication SyStEm
Sy
St
Em
o
VER
ViEW
FL
ig
Ht
in
St
RU
m
Ent
S
EiS
aU
dio
P
an
EL
&
cn
S
FL
ig
Ht
mana
g
Em
Ent
Ha
Za
Rd
aV
oid
anc
E
a
Fc
S
additiona
L
FE
at
URES
a
PPE
ndic
ES
ind
EX
Section 3 engine indication SyStem
note:
Refer to the Airplane Flight Manual (AFM) for limitations.
The Engine Indication System (EIS) for the Cessna T240 displays critical engine, electrical, fuel, and other
system parameters on the left side of the MFD during normal operations. EIS information can be expanded to
a half MFD display using the Touchscreen Controller to show additional information. In Reversionary Mode,
the system presents EIS information with PFD symbology (refer to the System Overview for information about
Reversionary Mode).
Instrument types include dial gauges, horizontal and vertical bar indicators, digital readouts, slide bars, and bar
graphs. Green bands indicate normal ranges of operation; yellow and red bands indicate caution and warning
ranges, respectively. White bands indicate areas outside of normal operation that are not in the caution or
warning ranges.
If gauge parameters enter a caution condition, the gauge title, pointer, and readout become yellow with black
text. If a gauge enters a warning condition, the gauge title, pointer, and readout flash red and white inverse video.
If sensory data to an instrument becomes invalid or unavailable, the system displays a yellow ‘X’ across the
instrument. The system displays dashes instead of a readout if the sensor input for a readout is out-of-range.
EIS Display
Figure 3-1 MFD with EIS Display (Normal Mode)
This manual downloaded from http://www.manualowl.com
