Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-01 Rev. A
82
Flight instruments
sY
stem
O
Ver
Vie
W
Flight
instruments
eis
Au
D
iO P
A
nel
& C
ns
Flight
m
A
n
Agement
hAZA
rD
AV
O
iD
A
n
Ce
AFC
s
ADD
iti
O
n
A
l
Fe
Atures
APP
en
D
iC
es
in
D
eX
Figure 2-27 Typical LNAV and LNAV+V Approach CDI Scaling
1.0 nm
2 nm
350 ft
angle set
by system
0.3 nm
FAF
CDI Full-scale Deflection
CDI scale is set to the smaller of 0.3 nm
or an angle set by the system
CDI scale varies if VTF is activated
Figure 2-28 Typical LNAV/VNAV, LPV, and LP Approach CDI Scaling
1.0 nm
2 nm
FAF
0.3 nm
course width
Landing
Threshold
CDI Full-scale Deflection
angle based
on database
information
CDI scale varies if VTF is activated
• When a
missed approach
is activated, the CDI scale changes to 0.3 nm.
• The system automatically switches back to
terminal
scaling under the following conditions:
- The next leg in the missed approach procedure is not aligned with the final approach path
- The next leg in the missed approach procedure is not CA, CD, CF, CI, CR, DF, FA, FC, FD, FM, IF, or TF
- After any leg in the missed approach procedure that is not CA or FA
Flight Phase
Annunciation
Automatic CDI Full-scale Deflection
Departure
DPRT
0.3 nm
Terminal
TERM
1.0 nm
Enroute
ENR
2.0 nm
Oceanic
OCN
4.0 nm
Approach
(Non-precision)
LNAV
1.0 nm decreasing to 350 feet depending on
variables (see Figure 2-27)
Approach
(Non-precision with
Vertical Guidance)
LNAV + V
Approach
(LNAV/VNAV)
L/VNAV
1.0 nm decreasing to a specified course width, then
0.3 nm, depending on variables (see Figure 2-28)
Approach
(LPV)
LPV
Approach
(LP)
LP
Missed Approach
MAPR
0.3 nm
Table 2-1 Automatic GPS CDI Scaling
This manual downloaded from http://www.manualowl.com