190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
83
Flight instruments
sY
stem
O
Ver
Vie
W
Flight
instruments
eis
Au
D
iO P
A
nel
& C
ns
Flight
m
A
n
Agement
hAZA
rD
AV
O
iD
A
n
Ce
AFC
s
ADD
iti
O
n
A
l
Fe
Atures
APP
en
D
iC
es
in
D
eX
OBS MODE
note:
VNV is inhibited while automatic waypoint sequencing has been suspended.
Enabling Omni-bearing Selector (OBS) Mode suspends the automatic sequencing of waypoints in a GPS
flight plan (FMS must be the selected navigation source), but retains the current “active-to” waypoint as the
navigation reference even after passing the waypoint. ‘OBS’ is annunciated to the lower right of the aircraft
symbol when OBS Mode is selected.
While OBS Mode is enabled, a course line is drawn through the “active-to” waypoint on the moving map.
If desired, the course to/from the waypoint can now be adjusted. When OBS Mode is disabled, the GPS flight
plan returns to normal operation with automatic sequencing of waypoints, following the course set in OBS
Mode. The flight path on the moving map retains the modified course line.
Figure 2-29 Omni-bearing Selector (OBS) Mode
OBS Softkey
OBS Softkey
FMS
Selected
OBS Mode
Enabled
Enabling/disabling OBS Mode while navigating a GPS flight plan:
1)
Select the
OBS
Softkey to select OBS Mode.
2)
Turn the
CRS
Knob to select the desired course to/from the waypoint. Press the
CRS
Knob to synchronize the
Selected Course with the bearing to the next waypoint.
3)
Select the
OBS
Softkey again to return to automatic waypoint sequencing.
This manual downloaded from http://www.manualowl.com
