Garmin G2000 Pilot’s Guide for the cessna T240
190-01263-01 Rev. A
120
engine indication SyStem
Sy
Stem
o
Ver
VieW
fligHt
inStrUmentS
eiS
aUdio p
anel
& cnS
fligHt
mana
gement
HaZard
aV
oid
ance
afcS
additional fea
tUreS
appendiceS
indeX
engine lean aSSiSt mode
NOTE:
Consult the Airplane Flight Manual (AFM) for leaning procedures.
The Engine Lean Assist Mode is accessed using the Touchscreen Controller.
While the Lean Assist Mode is active, the system indicates the peak of each TIT on the EIS display with a
light blue bar which remains at the peak Turbo Inlet Temperature. Readouts below each TIT gauge indicate the
difference between each peak TIT and the current temperature. An indicator below the readout shows whether
each TIT is operating ‘LEAN’ or ‘RICH’ of peak TIT.
Enabling/Disabling lean assist Mode:
1)
From
home
, touch
aircraft Systems
.
2)
Touch the
lean assist
Button. The button annunciator is green when Lean Assist Mode is enabled, annunciator
is gray when disabled.
Lean or Rich
from Peak
TIT Deviation
from Peak
Peak TIT
Figure 3-23 Engine lean assist Mode (EIS Display)
SUpplemental oXygen SyStem
The
Oxygen
Button on the Touchscreen Controller enables or disables the supplemental oxygen system.
Enabling/Disabling the Oxygen System:
1)
From Home, touch
aircraft Systems
.
2)
Touch the
Oxygen
Button. When the button annunciator is green, oxygen is enabled, annunciator is gray when
disabled.
This manual downloaded from http://www.manualowl.com
