Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 491 / 603

Error Code
489
Problem Solving
16
027-750
O [Cause] Attempted to give a fax/print/iFax command to the scan
document.
[Remedy] Fax/print/iFax features are unavailable for scan
documents. Set the job flow correctly.
027-751
O [Cause] An error occurred during job flow processing.
[Remedy] Check the settings of the job flow.
027-752
O [Cause] A mandatory entry field is blank in the job flow.
[Remedy] Take one of the following actions:
z
Link mailboxes only to job flows that do not have
mandatory entry fields.
z
Set the default values to the mandatory fields of the job
flow.
027-753
O [Cause] Attempted to execute the service when the port necessary
for the job flow is either deactivated or disabled.
[Remedy] Have your System Administrator check the port status.
027-754
O [Cause] The setting contents for [DocuWorks Signature] or [PDF
Signature] on the job flow are not appropriate.
[Remedy] Check the DocuWorks and PDF signatures for both the
system data settings (machine's current settings) and the
executed job flow settings. If these settings are not the
same, change either of them.
027-796
O O O [Cause] The received e-mail was discarded because it had no
attached documents. (The machine is set to print attached
documents only.)
[Remedy] To also print the mail body or header information, change
settings in the Properties screen of CentreWare Internet
Services.
Refer to "E-mail Printing" (P.229).
027-797 O O [Cause] The output destination of the received e-mail is invalid.
[Remedy] Specify a correct output destination, and send the e-mail
again.
033-363 O [Cause] An error occurred during fax transmission.
[Remedy] Contact our Customer Support Center.
033-710
O [Cause] The document to be sent by polling was deleted.
[Remedy] Store the document again.
033-712
O [Cause] Unable to process due to insufficient memory.
[Remedy] Remove unnecessary data.
033-713
O [Cause] An error occurred during fax transmission.
[Remedy] Contact our Customer Support Center.
033-716 O [Cause] The mailbox specified from the sender's machine does not
exist.
[Remedy] Register the mailbox.
Refer to "Mailbox" (P.328).
033-717
O [Cause] The mailbox password specified from the sender's
machine is incorrect. Or, the machine password is
incorrect.
[Remedy] Notify the correct password to the sender's machine.
Error Code
Category
Cause and Remedy
C P F S M O