Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 378 / 603

13 Machine Status
376
M
ach
in
e St
atu
s
13
Programming
You can check or change the values set for the print mode item numbers.
For information on item numbers that can be set in each emulation mode, refer to "Appendix" (P.523).
For information on the KS/KSSM emulation, refer to the Korean version of this User Guide.
For information on the ESCPK emulation, refer to the Traditional or Simplified Chinese version of this
User Guide.
1
Select [Programming].
2
Enter the feature number to be set
in [Item Number] using the numeric
keypad.
3
Select [Confirm] as necessary.
4
Select [Change Value].
5
Enter [New Value] using the
numeric keypad.
6
Select [Save].
„ Item number
Enter the item number of the feature to be set.
„ Current Value
When you enter [Item Number], the currently set value appears.
„ New Value
Enter a new value.
Store/Delete Programming
For the ESC/P and HP-GL/2 emulations, you can register print modes in the memory.
You can register up to 20 print modes for ESC/P and HP-GL/2 emulations.
1
Select [Store/Delete Programming].
2
Select [Store Current Selections] or [Delete].
3
Select the memory number to be stored or to be deleted.
„ Store Current Selections
Stores the current selections. If you select a number already stored, its settings will be
overwritten with the new settings. The overwritten settings cannot be restored.
„ Delete
When you select [Delete] and then select the number to be deleted, the number will be
deleted.
Important • The deleted numbers cannot be restored.
Default Programming
You can start the printer in a print mode stored in the memory.