Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 476 / 603

16 Problem Solving
474
Problem Solving
16
016-752
O [Cause] Unable to process for PDF Bridge due to insufficient
memory space.
[Remedy] Change the [Print Mode] setting from [High Image Quality]
to [Normal], or from [Normal] to [High Speed]. Or, add
memory.
016-753
O [Cause] The entered password does not agree with that of the PDF
file.
[Remedy] Set the correct password on ContentsBridge.
016-755
O [Cause] Attempted to process a print protected PDF file.
[Remedy] Cancel the print protection using Adobe Reader, and try to
print again.
016-756
O [Cause] No permissions to use the service.
[Remedy] Check with your System Administrator.
016-757
O [Cause] The password is incorrect.
[Remedy] Enter the correct password.
016-758 O O O O [Cause] No permissions to use the service.
[Remedy] Check with your Auditron Administrator.
016-759
O O O [Cause] The number of pages reached the maximum number of
pages for this service.
[Remedy] Check with your Auditron Administrator.
016-760
O [Cause] An error occurred during PostScript (optional) processing.
[Remedy] Take one of the following actions:
z
Set [Print Mode] to [Normal].
z
Expand PostScript memory.
For information about [Print Mode], refer to the print driver's online help.
For information about memory, refer to "Allocate Memory" (P.303).
016-761 O [Cause] An error occurred during image processing.
[Remedy] Set [Print Mode] to [Normal] and try again. If the problem
persists, set [Page Print Mode] to [On].
016-762 O [Cause] The specified print language is not installed on the
machine.
[Remedy] In [Specify Print Mode] under [Port Settings], specify
another print language.
016-764 O [Cause] Unable to connect to the SMTP server.
[Remedy] Contact the SMTP server administrator.
016-765
O [Cause] Unable to send the e-mail because the hard disk on the
SMTP server is full.
[Remedy] Contact the SMTP server administrator.
016-766
O [Cause] An error occurred on the SMTP server.
[Remedy] Contact the SMTP server administrator.
016-767
O [Cause] Unable to send the e-mail due to an incorrect address.
[Remedy] Check the address, and try again.
016-768 O [Cause] Unable to connect to the SMTP server due to the
machine's incorrect mail address.
[Remedy] Check the machine's mail address.
016-769
O [Cause] The SMTP server does not support confirmation of mail
distribution (DSN).
[Remedy] Send e-mail without setting confirmation of mail
distribution (DSN).
Error Code
Category
Cause and Remedy
C P F S M O