Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 568 / 603

17 Appendix
566
Ap
pe
nd
ix
17
Notes and Restrictions
This section describes the notes and restrictions to observe when using the machine.
Notes and Restrictions on the Use of the Machine
„ HDD (Optional)
z
When a HDD is installed, you can specify the hard disk as a storage location for print
data received from lpd, SMB, and IPP. The storage location for each HP-GL/2 form
is also the hard disk, and cannot be changed to other locations.
z
The data erased by initializing the hard disk includes the added fonts, each form of
HP-GL/2 and ESC/P. Secure Print documents and logs are not erased.
„
When the Print Results Differ from the Settings
As in the following cases, insufficient memory for the print page buffer may cause print
results to be different from what was expected from the settings. If this happens, we
recommend you to increase the memory.
z
Printed only on one side when 2-sided printing was specified.
z
A job was terminated (If data on a page cannot be written to the print page buffer, the
job including that page will be terminated).
„ Options
z
To use the Secure Print, Private Charge Print, Sample Print, or Delayed Print
feature, the optional HDD needs to be installed.
z
To use the Print to Mailbox feature, the optional Full Scan Kit needs to be installed.
z
To use the machine as a PostScript printer, the optional PostScript 3 Kit needs to be
installed.
„ Installing and Moving the Machine
z
When moving the machine to another location, contact our Customer Support
Center.
z
When the machine is in operation, do not subject it to shock.
z
When closing the document cover, be careful not to trap your fingers.
z
Do not place any objects near the ventilation opening of the machine's extractor fan.
„ Meter Counts for 2-Sided Printing
z
When printing 2 sided, depending on the application the machine uses, blank sheets
can be inserted automatically to adjust pages. Such blank sheets inserted by the
application are also counted by the meter.
„ Job Counter Report
When you have been specified two or more different [Multiple-up] settings using the
Build Job feature, the numbers of pages for [2-up] and [Other than 2-up] displayed on
Job Counter Reports are calculated according to the latest N-up setting you specified.