Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 471 / 603

Error Code
469
Problem Solving
16
016-525
O [Cause] LDAP server SSL authentication error. The server
certificate has expired.
[Remedy] Change the SSL certificate of the LDAP server to a valid
one. This error can be cleared if you select [Off] for
[Authentication with SSL] under [LDAP Server/Directory
Service] on the machine; however, note that selecting this
option will not ensure the validity of the LDAP server.
016-526 O [Cause] LDAP server SSL authentication error. The server name
does not match the certificate.
[Remedy] Set the same LDAP server address to the machine and
the SSL certificate of the LDAP server. This error can be
cleared if you select [Off] for [Authentication with SSL]
under [LDAP Server/Directory Service] on the machine;
however, note that selecting this option will not ensure the
validity of the LDAP server.
016-527
O [Cause] LDAP server SSL authentication error. This is an SSL
authentication internal error.
[Remedy] Software has a problem. Contact our Customer Support
Center.
016-533
O [Cause] Kerberos server authentication protocol error
[Remedy] The time difference between the machine and the
Kerberos server exceeded the clock skew limit value set
on the Kerberos server. Check if the clocks on the
machine and Kerberos server are correctly set.
016-534
O [Cause] Kerberos server authentication protocol error
[Remedy] The realm set on the machine does not exist on the
Kerberos server, or the Kerberos server address set on
the machine is invalid for connection. Check if the realm
name and the server address have been correctly set on
the machine. For connection to Windows 2000 or Windows
2003 Server, specify the realm name in uppercase.
016-539
O [Cause] Kerberos server authentication protocol error
[Remedy] An error occurred on the software. Contact our Customer
Support Center.
016-546
O [Cause] A general user tried to obtain the information of another
user.
[Remedy] Contact our Customer Support Center.
016-702
O [Cause] Unable to process PCL print data due to insufficient print
page buffer.
[Remedy] Take one of the following actions:
z
Set [Print Mode] to [Normal].
z
Set [Page Print Mode] to [On].
z
Increase the print page buffer size.
z
Add on memory.
For information about the Print Mode and the Page Print Mode, refer to the
print driver's online help. For information about memory, refer to "Allocate
Memory" (P.303).
Error Code
Category
Cause and Remedy
C P F S M O