Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 422 / 603

15 Maintenance
420
Ma
int
ena
nc
e
15
6
Place the unit in the machine,
aligning the arrow indicators.
7
Fasten the unit into position by
rotating the screws clockwise.
8
Close the side cover.
9
Select [Reset Counter] on the screen.
10
Select [Yes] on the screen to reset the counter.
Replacing the Fuser Unit
The fuser unit lasts approximately 100,000 copies and prints. The machine will display
a warning message approximately 1,500 copies and prints before the unit reaches the
end of its life. Another message will be displayed when the unit needs to be replaced.
1
Select [Fuser] on the [Supplies] screen or the [Consumables Status] screen.
2
Turn the power off, unplug the
machine, and allow the machine to
cool for approximately 30 minutes.
3
Pull the side cover open.