Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 473 / 603

Error Code
471
Problem Solving
16
016-714
O [Cause] The specified mailbox does not exist.
{Remedy] Create a new mailbox or specify an existing mailbox.
016-716
O [Cause] Unable to spool TIFF file due to insufficient hard disk
space.
[Remedy] Remove unnecessary documents and users from the
machine, and then attach the hard disk. For information on
attaching the hard disk, contact our Customer Support
Center.
Refer to "Printing/Deleting Documents in the Mailbox" (P.202).
016-717 O [Cause] Unable to create a transmission report (undelivered) or
transmission report because transmission result
information required for creating the report is not stored in
the machine's memory.
[Remedy] Take one of the following actions:
z
Execute the jobs for large size iFax documents (about
2GB) by splitting each document to minimize memory or
HDD usage.
z
If there are many scan or iFax jobs, execute each job after
the previous job is complete.
z
After the job that you want to check in a report is
completed, do not execute 200 or more jobs to have the
job recorded on a report.
016-718 O [Cause] Unable to process the PCL print data due to insufficient
memory.
[Remedy] Reduce the resolution, or cancel 2-sided printing or N up,
and then print again.
016-719 O [Cause] Unable to process the PCL print data due to insufficient
print page buffer.
[Remedy] Increase the size of the print page buffer.
016-720
O [Cause] An invalid command is included in PCL print data.
[Remedy] Check the print data and try to print again.
016-721
O O [Cause] An error occurred during print processing. Probable
causes are as follows:
1. Printing was instructed by [automatic tray selection]
when [Paper Type Priority] is set to [Automatic Tray
switching Off] for all paper in the [Common Settings].
2. ESC/P command error
[Remedy] For Cause 1: When printing by automatic tray selection,
set one of the paper types to a setting other than
[Automatic Tray switching Off] in [Paper Type Priority].
For Cause 2:Check the print data.
Refer to "Paper Type Priority" (P.272).
016-722
O [Cause] The staple position you specified is unsupported.
[Remedy] Check the staple position and try to print again.
016-725 O [Cause] A scanned document stored in a mailbox was to be sent by
fax using the Job Flow feature, but the mailbox document
could not be converted to fax data.
[Remedy] Do not use the Job Flow feature. Simply scan the
document through the machine's [Fax] screen to send it by
fax.
Error Code
Category
Cause and Remedy
C P F S M O