Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 455 / 603

Trouble during Copying
453
Problem Solving
16
Unable to make color
copies. Cause [Output Color] is set to [Black].
No Action Set [Output Color] to [Auto Detect] or [Color].
Refer to "Output Color (Selecting the Color to Copy)" (P.56).
The document edges are
missing on the copy. Cause The document is larger than the printable area.
No Action Adjust [Reduce/Enlarge] to make the copy smaller.
Colors differ between the
original and the copy. Cause Tonal reproduction is misconfigured.
No Action Perform gradation adjustment.
Refer to "Executing Auto Gradation Adjustment" (P.432).
Cause A document type appropriate for this document is not selected.
Action In [Original Type], select a type appropriate for the document.
Refer to "Original Type (Selecting the Document Type)" (P.61).
Documents are not
stapled. Cause The Finisher is not attached.
Action A finisher is needed to perform stapling. Attach the Finisher, or
change the print option setting to cancel stapling.
Cause The number of pages to staple exceeds 50.
Action A maximum of 50 pages can be stapled. Reduce the number
of pages to 50 or less.