FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 120 / 250

106
8-2-5. WARP (Option)
Parameter Range Description
WARP
* TYPE
See "About TYPE" table
following.
Selects the type of DVE effect applied to the pattern.
LEVEL OFF, -7999-7999 See "About TYPE" table following.
DIR OFF, -7999-7999 See "About TYPE" table following.
RAD 0-7999 See "About TYPE" table following.
ROLL OFF, -7999-7999 See "About TYPE" table following.
* Note that the available setting parameters and setting ranges vary depending on the WARP type. Only the
required parameters are displayed in the menu when the WARP type is selected. A WARP type such as
SPHERE, MULTI and PIZZA each uses its own parameters. See TYPE table following for notes which
types are not possible for certain settings.

About TYPE:
TYPE sets the type of warp effect used to modify your DVE pattern. The following table
shows available types and which settings in the above menu apply or do not apply to the
related type as well as how they are applied. (X mark equals setting is invalid.)
TYPE LEVEL DIR RAD ROLL
*PGTURN 0 to 2999 -7999 to 7999
0 to 7999
X
*HZTURN 0 to 2999 250 to 750 X
*VZTURN 0 to 2999 0 to 500 X
*QDTURN 0 to 2999 -125 to 125 X
*PGROLL 0 to 1500 -7999 to 7999 X
*HZROLL 0 to 1500 250 to 750 X
*VZROLL 0 to 1500 0 to 500 X
*QDROLL 0 to 1500 -125 to 125 X
WAVE -1000 to 1130 -7999 to 7999 0 to 1900 -7999 to 7999
ACCORD -1000 to 1130 -7999 to 7999 0 to 1900 -7999 to 7999
SPLIT -1000 to 1130 -7999 to 7999 0 to 1900 -7999 to 7999
XSPLIT -1000 to 1130 -7999 to 7999 0 to 1900 -7999 to 7999
BURST 0 to 1000 -7999 to 7999 X -7999 to 7999
STREAM 0 to 1000 -7999 to 7999 X X
*SW WIN -1000 to 7999 -7999 to 7999 X X
RIPPLE 0 to 1000 X X X
LENS -1000 to 1000 X X X
TYPE LEVEL QUAD X, Y
*SPHERE 0 to 1000 -7999 to 7999
SCREW1-4 -1000 to 1000 X
STRM1-12 0 to 1000 X
TYPE LEVEL GAP SIZE
MULTI 1 to 45 -8000 to 1000
TYPE LEVEL RAD
PIZZA SIDE1
X, Y
PIZZA SIDE2
X, Y
SIDE BORDER
*PIZZA
(PIZZA BOX)
1 to 1000 1 to 1000 -1000 to 1000 -1000 to 1000 OFF, ON
TYPE LEVEL SIDE1 X, Y SIDE2 X, Y
SIDE1, SIDE2
settings available
only when BACK
IMAGE is set to ON
*BEVEL 0 to 1000 -1000 to 1000 -1000 to 1000
W DROP 0 to 4
IMPORTANT
1) For some types of the WARP effect, the use of HILITE is impossible and for other
types it is limited. See section 8-2-9. "HILITE/SHADOW" for details.
2) MULTI type warp cannot be used with MOSAIC effect at the same time. (MULTI is
given priority.)
3) Refer to sections 9-2-2 and 9-2-3 for more details about MULTI, PIZZA operations.