177
16-1-5. Color Logic
Applying logics (conditions or formula) to tallies allows you to control the tallies with
conditions as shown below.
To open COLOR LOGIC menu:
Open the [FUNCTION - GPI/TALLY] menu.
Turn F1 to select COLOR LOGIC. Press F1 to open the menu as shown below.
COLOR LOGIC Setting Menu
In the COLOR LOGIC menu, logic circuits can be incorporated in the following way.
Conditions:
GPO signals (1 to 16) are POSI or NEGA.
Logical formula:
TARGET_COLOR=TARGET_COLOR <Operator> SRC_COLOR
Available colors:
RED/GREEN/COLOR1 to COLOR10
In terms of program language, this is written in the following way:
if(Condition=GPO ”XX” is POSI or NEGA.)
then TARGET_COLOR=TARGET_COLOR and/or/xor SRC_COLOR
In the Hanabi switcher, the statement above is expressed using the menu shown below.
NO
．
Select from 1 to 30.
SEL1 TARGET COLOR is selected from OFF, RED, GREEN and COL01 to COL10.
SEL2 The condition (signal polarity) is selected between POSI and NEGA.
SEL3 The condition (signal) is selected from GPO-01 to GPO-16.
SEL4 The logical operator when the conditions are met is selected from OR/AND/XOR.
SEL5 SRC COLOR is selected from NON, RED, GREEN, COL01 to COL10.
FUNCTION
GPI/TALLY
1.TALLY COLOR
2.GPI IN
3.GPI OUT
4.TALLY1
5.TALLY2
SELECT
9
6.TALLY3
7.TALLY4
8.TALLY5
9.COLOR LOGIC
FUNCTION GPI/TALLY
COLOR LOGIC
1.
2.
3.
4.
5.
NO.
1
RED = POSI GPI-01 OR
RED = POSI GPI-02 OR
OFF = POSI
OFF = POSI
OFF = POSI
SEL1
RED
SEL2
POSI
SEL4
OR
SEL5
COL09
SEL3
GPO-1
COL09
COL10
TARGET_COLOR
Conditions
Logical
operator
SRC_COLOR
FUNCTION GPI/TALLY
COLOR LOGIC
1.
2.
3.
4.
5.
NO.
1
RED = POSI GPI-01 OR
RED = POSI GPI-02 OR
OFF = POSI
OFF = POSI
OFF = POSI
SEL1
RED
SEL2
POSI
SEL4
OR
SEL5
COL09
SEL3
GPO-1
COL09
COL10
OR/AND/XOR
Summary of Contents for HVS-12ROUA
Page 25: ...11 Circuit Max voltage 40V External Device HVS 3800HS S Max load current 100mA...
Page 240: ......
Page 248: ......
