FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 101 / 250

87

On the WIPE PATTERN menu, the letter "M" is added in front of the number of the DVE
pattern for which a modify setting has been performed. Similarly, the letter "M" is added to
the icon on the pattern block of the transition section. This modify pattern can be used in
the same way as a preset pattern.
NOTE
If two or more identical patterns have been registered on the WIPE PATTERN list, it is
possible to use standard preset pattern and modify patterns or different modify
patterns.
Once a DVE pattern for which a modify setting has been performed on the WIPE
PATTERN menu is deleted, the modify information is lost. Even if the same pattern is
registered again, all the parameters of the pattern are returned to their defaults. It is
recommended that the required modify data be backed up in the event memory or on
the memory card while the work is being carried out. For details on how to back up the
information, refer to section 12-2, "Saving Events" and section 13-2 "Saving Data to
CF Cards."
6-8-2. Channels and Keyframes
When modifying DVE patterns, pay attention to the channels and keyframes.

Keyframes to which the patterns are applied
Depending on the effect concerned, in some cases a modified pattern is automatically
applied to all keyframes and in other cases it is applied to the last keyframe (or first keyframe
when REVERS is selected for the KF DIR item on the FUNCTION-DVE SETUP menu). Refer
to the table below.
Keyframe to which the
patterns are applied
Effects (parameters)
Last or first keyframe
POS (X,Y), SIZE (X,Y)
GLOBAL POSITION (X,Y,Z), GLOBAL ROTATION (X,Y,Z), LOCAL
POSITION (X,Y,Z), LOCAL ROTATION (X,Y,Z)
FADE, WARP LEVEL
All keyframes
CROP, WARP TYPE, BORDER, HILITE, SHADOW,
MONO, PERSP, NEGA, MOSAIC, PAINT, DEFOCUS, FREEZE,
STROBE
6-8-3. EDIT Mode
When exercising control from an editor, it is more convenient to change to the EDIT mode
first. Change the BUTTON CTRL item on the OU SETUP - MODE menu from LIVE (factory
default setting) to EDIT. The main differences between the LIVE and EDIT modes are listed
below.
Display information LIVE EDIT
Modify pattern number
displayed
Preset button number
with "M" added
M511 to M555
(M5 + list group list number)
Change transition type during
transition
Not available Available
Transition type auto-change by
selecting a WIPE (DVE)
pattern button
Not available Available
Transition auto-start by
deselecting FADER LIMIT
Not available Available