FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 60 / 250

46
5-3. Gradation Matt
The gradation matts can be used for the border colors or key insert (key fill), and they can be
adjusted in the GRADATION MATT submenu of the FUNCTION menu.

Assignable buses
The gradation matts can be assigned to the following buses:
WIPE BORDER
KEY INSERT
AUX7 - 10
EFFECT BKGD
NOTE
Note that the gradation matts cannot be assigned to the M/E bus.

Making the gradation matts
Press the FUNC button in the SYSTEM group of the menu section to display the FUNCTION
menu. In the FUNCTION menu, turn F1 to select GMATT. Press F1 or the DOWN Button to
display the GRADATION MATT submenu.
To setup gradation matts, use a WIPE pattern to specify a shape, and determine the number of
colors and degree of softness. Adjust the colors while viewing on a monitor. If necessary, modify
the WIPE pattern using ASPECT, POSITION, ANGLE, and/or MULTI items.
The following options can be set in the GRADATION MATT menu.
Menu items Setting range Description
MON OUT AUX7 - 10
Selects where the gradation matt is displayed for
monitoring.
*GMATT COLOR 2 - 5 Designates the number of colors used in the gradations.
SOFT LEVEL 0 - 150.0 Adjusts the degree of color softness.
GRAD PATTERN 0 - 99 Selects the WIPE pattern number used in the gradation.
ASPECT
Refer to the WIPE MODIFY(1/3) menu (section 6-7-2. "WIPE MODIFY
Menu”)
POSITION(X,Y)
ANGLE
MULT(X, Y)
* The number of colors is designated by GMATT COLOR, and the colors are adjusted using the
WIDTH, SATURATION, LUMINANCE, and HUE options in the GRADATION MATT(2/2) menu. The
colors used in the gradation matts are indicated by GRAD MATT1 to 5 as shown below.
Example of gradation matt
WIPE PATTERN: 51
GMATT COLOR: 5
SOFT LEVEL: 0
GRAD MATT1
GRAD MATT2
GRAD MATT3
GRAD MATT4
GRAD MATT5