FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 161 / 250

147
MODULE setting Assignable bus
ME1 BG M/E1PGM (A BUS), M/E1PST (B BUS)
ME1KEY M/E1KEY1, M/E1KEY2, M/E1KEY3
ME2 BG M/E2PGM (A BUS), M/E2PST (B BUS)
ME2KEY M/E2KEY1, M/E2KEY2, M/E2KEY3
AUX AUX1-10
MODULE ME1 BG ME1KEY ME2 BG ME2KEY AUX
TYPE setting SELECT setting
BUS
M/E1PGM
M/E1PST
M/E1KEY1
-3
M/E2PGM
M/E2PST
M/E2 KEY1-3 AUX1-10
INPUT BLACK, IN01 - 28, MATT1, MATT2, STILL1 - 6, WHITE, COLBAR
BUTTON BUTTON1 - 34
When INPUT or BUTTON is set, assignable input buses or buttons are the same regardless of the module.
If a different color correction channel is applied to the same signal, the priority levels are as follows:
BUS > BUTTON > INPUT

Turn F5 to ENABLE to ON to activate the color correction channel.

Now the selected video signal can be processed using Proc Amp, Color Correction and Clip
adjustment. Check and adjust the signal using a waveform monitor and vectorscope. Also
use an SDI monitor to compare between pre and post-processed images.
IMPORTANT
Color Correction channels can be assigned to USER buttons only when the control
type (TYPE) is set to INPUT or BUTTON. See section 4-4-1 and 4-4-2 for more details.
Name indicators of bus signals will light up orange, if color correctors are assigned to
the input bus signals by using INPUT or BUTTON type setting for ME1BG or ME2BG
and LED COLOR is set to ON. In HVS-12ROUA the indicator to the right side of each
bus section will light up when BUS is selected for the control type (TYPE).