FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 129 / 250

115
IMPORTANT
When using DVE effects, the DVE background signal will be displayed if the screen
cannot be filled using only the PGM bus and PST bus signals. The DVE background
signal can be selected in the TRANS/BKGD(2/2) menu. MATT, GMATT, AUX7 and
AUX8 for M/E1 and MATT, GMATT, AUX9 and AUX10 for M/E2.
9-2-2. DVE MULTI MOVE (DVE Pattern Modify)
This setting example shows the adding of multi-effects to a DVE image. This effect can be
applied to either DVE pattern or LINE DVE. The HVS-38DVE 3D option board is required for
DVE MULTI MOVE.
 Display the MODIFY menu.
<HVS-16/24OUA>
Press the POS button in the SYSTEM group of the menu section. The button lights up
orange, and the DVE MODIFY (1/8) menu appears. Now check that the DVE-PGM button
in the M/E2 (or M/E1) section of the menu section is lighted up orange. If it is lighted up
green, press the DVE-PGM button to light it up orange.
<HVS-12ROUA>
Press the WIPE/DVE MODIFY button in the M/E2 (or M/E1) of the menu section. The
DVE MODIFY top menu will open. Turn F1 to select POS/SIZE, and then press F1 to
open the DVE-MODIFY(1/8) menu. If the DVE-PGM(7) button in the KEYPAD section is
lighted up orange. If it is lighted up green, press the DVE-PGM button to light it up orange.

Change the POSITION, SIZE, and other parameters, and then place the DVE image in
the center of the screen.

Press the DOWN button to open the DVE MODIFY (2/8) menu, and change LOCAL
ROTATION.

Open the DVE MODIFY(3/8) menu and change
PERSP to create the DVE image as shown at
right.

Open the DVE MODIFY(4/8) menu and select
MULTI under WARP TYPE.

Set the LEVEL to 3. Nine (3 x 3) multi-video will
be displayed in the DVE image.

By increasing the GAP SIZE gradually widens
the gap between videos, and the open space
appears black. Lowering the value closes the
gap between the images, and they will gradually
overlap. Set the gap for split screens
.
IMPORTANT
If borders are used, they are added to the outer frame of the DVE image, instead of the
frames of each individual multi-video. This setting cannot be used together with
MOSAIC.
Width is determined
by GAP SIZE.
Border