FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 178 / 250

164
15-3-4. Safety Area Markers
In Hanabi series switchers Safety Area marker and Side Cut marker (HD only) are available.
The safety area markers can be displayed ON/OFF for each output bus. In addition, the
marker type can be selected from various options.
There are two modes for the safety area markers: Fixed mode (default) and Variable mode. If
you wish to adjust finely the safety area size for each output, select the Fixed mode. If the
Variable mode is selected, the safety area settings are almost the same for all outputs. The
items displayed on the menu page are different in two modes.

Selecting Mode between Fixed and Variable
Marker functions are set at the SF MODE item in the MU SETUP-OUTPUT (2/2) menu. Note
that if you change the safety area mode, the safety area settings are reset to default values.

Fixed Mode
（
Default
）
Parameter Description Default Setting Range
SAFETY
AREA
OUT
Sets which output
safety marker applied
to.
ME1PGM
ME1PGM, ME1PRV, ME1CLN,
ME2PGM, ME2PRV, ME2CLN,
AUX1-16
ENABLE Sets safety marker
ON/OFF.
OFF OFF, ON
TYPE Selects marker type. OFF
OFF, 90%KEY, 85%KEY, 80%KEY,
90%BOX, 85%BOX, 80%BOX,
85%B+80%K, 90%B+85%K,
90%B+80%K, 85%B+80%B,
90%B+85%B, 90%B+80%B
CROSS
Displays safety area
center point.
OFF OFF, ON
ASPECT
(*1)
Selects aspect ratio for
the safety area.
HD 16:9 16:9, 4:3
SIDE
CUT
(HD only)
OUT
Sets which output side
cut applied to.
ME1PGM
ME1PGM, ME1PRV, ME1CLN,
ME2PGM, ME2PRV, ME2CLN,
AUX1-16
ENABLE Sets side cut ON/OFF. OFF OFF, ON
TYPE Selects marker type. LINE LINE, TRANSP
TRANSP
Sets the transparency
level if TYPE set to
TRANSP.
50 0~100
(*1) The aspect ratio is fixed to 4:3 in SD mode, therefore ASPECT item is not displayed in SD mode.
MU SETUP OUTPUT(2/2)
M/E1
ON
M/E2
ON
A
ME1PGM
CLEAN OUT
B
ME2PGM
KEY OUT SF
MODE
FIXED
CROSS
OFF
MU SETUP OUTPUT(1/2)
OUT
ME1PGM
OUT
ME1PGM
ENABLE
OFF
ENABLE
OFF
TYPE
OFF
TYPE
LINE
TRANSP
50
SAFETY AREA
SIDE CUT
ASPECT
16:9