FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 47 / 250

33
4-6. Parameter Copy
Values set for items in menus can be easily copied. Up to six settings can be stored in the copy
buffer.

Parameter copy operation (Copying the MASK parameter value in the M/E1-KEY1
menu to M/E2-KEY1)
 Open the menu (M/E1 - KEY1 - MATT MASK menu) from which an item is to be copied.

While holding down the COPY button in the SYSTEM group, press any one of controls (F1
to F6) for the related item to be copied, next press another control to be copied and so on
until the needed values are stored in the copy buffer sequentially. Once the values are stored
in the copy buffer, the beep will be heard once; if an item that cannot be stored was selected,
the beep will be heard twice.

When the data is stored in the copy buffer, the SWAP(PASTE) button becomes to lit green.

Open the menu (M/E2 - KEY1 - MATT MASK menu) where you want to paste the copied
data and use the UP/ DOWN buttons to move.

While holding down the SWAP(PASTE) button, press the control (F1 to F6) in the order to
which you want to paste.
IMPORTANT
 The data in the parameter copy buffer is retained until either data is saved again in
the copy buffer or the COPY button is held down. Even if the COPY button is
pressed during menu copy, the data in the parameter copy buffer is not erased.
(The data is lost when the OU power is turned off.)
 Only numeric values can be stored to the copy buffer.
 If an item value has a decimal fraction and it is copied to the one which has no
decimal fraction, it will be copied wrongly.
 The parameters are pasted in the order they were copied. Also, the paste
operation can be done continually at locations where pasted was already
performed, and so an empty paste operation is possible.
SYSTEM M/E 1
(PASET)
POS
ROT CROP
WARP
BORDER SUBEFF
TRAIL HILITE
MU
SETUP
OU
SETUP
FUNC
FILE
STATUS
M/E
BUS
MATT
STILL
EDITOR
COPY
POS
EDGE
EFFECT
GPI
SWAP
BLOCK
BORDER
TRANS
BKGD
WIPE
PATT
WIPE
MODI
DVE
PGM
DVE
PST
PREV
KEY1
MATT
MASK
EDGE
SHDW
CK
DVE
KEY1
KEY1
OVER
KEY2
MATT
MASK
EDGE
SHOW
CK
DVE
KEY2
KEY3
MATT
MASK
KEY3
DVE
HVS-16/24OUA
KEY1(2/6) INSERT-MATT
SAT
66.3
TYPE
OFF
COLOR
LUM
5.4
INVERT
OFF
HUE
3.5
MASK
TOP
0
BOTTOM
0
LEFT
0
RIGHT
0
BOX
SYSTEM / TRANSITION
SYS
MU
SETUP
OU
SETUP
FUNC
FILE
M/E
M/E2
M/E1
TRANS
BKGD
KEY1
TRANS
BKGD
KEY1
COPY
COPY
WIPE
PATT
KEY2
WIPE
PATT
KEY2
SWAP
PASTE
KEY3
KEY3
BLOCK
WIPE/DVE
MODIFY
WIPE/DVE
MODIFY
HVS-12ROUA
Press the control buttons in the copy order.