FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 111 / 250

97

KEY1, KEY2 and KEY3
The settings are performed in the same way for KEY1, KEY2 and KEY3 as well. Press the
DVE KEY1, DVE KEY2 and DVE KEY3 buttons respectively to light them up orange and
open the DVE MODIFY menu.
IMPORTANT
When there are no free DVE channels, the LINE DVE function is not available, and the
buttons will not light even if they are pressed. Cancel a BKGD, KEY1, KEY2 or KEY3
DVE transition, or another LINE DVE, and then press the button again. (For details on
the number of DVE channels, see section 6-9-8 "DVE patterns and number of
channels.")
The bus that is set in the DVE MODIFY menu is determined by the lighting colors of
the DVE-PGM, DVE-PST, DVE KEY1, DVE KEY2 and DVE KEY3 buttons. Pressing
the button opens the DVE MODIFY menu of the button that is orange.

Verifying what is to be modified
When the DVE MODIFY menu has been opened, it may be difficult to tell at a glance whether
the modify menu shown is for preset patterns or for LINE DVE. In a case like this, double-click
the WIPE POS button on the left of the joystick. The DVE MODIFY (1/1) screen is opened,
making it possible to verify what is being modified.
DVE MODIFY(1/8)
GLOBAL POSITION
Y
1000
X-Y
1000
Y
0
X
0
SIZE
X
1000
POSITION
Pattern
modify
DVE MODIFY(1/8)
GLOBAL POSITION
Y
1000
X-Y
1000
Y
0
X
0
SIZE
X
1000
POSITION
LINE
DVE
LINE DVE
modify