FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 42 / 250

28
When the DVE MODIFY menu is displayed, first press the DVE bus selection button (DVE
PGM, DVE PST, DVE KEY1, DVE KEY2, or DVE KEY3 button) in the M/E1(M/E2) section
so that it lights orange, and then select the applicable bus. Next, press one of the buttons
below to display the menu. In the transition section, these menus are displayed only when
the WIPE button is lit and a DVE pattern is selected.
Button Menu
POS / POS DVE MODIFY(1/8) - POSITION
EDGE / ROT DVE MODIFY(2/8) - ROTATION
CROP DVE MODIFY(3/8) - DVE CROP
WARP DVE MODIFY(4/8) - WARP
BORDER / BORDER DVE MODIFY(5/8) - BORDER
EFFECT / TRAIL DVE MODIFY(6/8) - TRAIL / MONO COLOR
SUB EFF DVE MODIFY(7/8) - SUB EFFECT
HILITE DVE MODIFY(8/8) - HILITE / SHADOW

M/E1, M/E2 group
Button Menu Description
TRANS/BKGD
TRANS (1/2 to 2/2)
DVE BKGD
Transition rate, Fader limit, Background and Color
Mix settings
WIPE PATT WIPE PATTERN Pattern register, select
WIPE MODI
WIPE MODIFY
(1/3 to 3/3)
WIPE pattern modify settings
After the button is lit, select the MODIFY submenu
button in the SYSTEM group
PREV PREVIEW Preview screen display settings
<DVE bus selection button>
DVE PGM
DVE MODIFY
(1/8 to 8/8)
After the button is lit, select the MODIFY submenu
button in the SYSTEM group.
(For details, refer to 7-1-2. "Opening the DVE
MODIFY menu” and 7-2-2. "Opening the DVE
MODIFY Menu”.)
DVE PST
DVE KEY1
DVE KEY2
DVE KEY3
<KEYER menu buttons>
The KEYER menu consists of multiple menus, and four vertical buttons (two for KEY3)
constitute one set and serve as menu shortcut buttons.
KEY1
MATT MASK
EDGE SHADOW
CK
KEY1 (1/6 to 6/6) KEYER1 setting
KEY2
MATT MASK
EDGE SHADOW
CK
KEY2 (1/6 to 6/6) KEYER2 setting
KEY3
MATT MASK
KEY3 (1/2to 2/2) KEYER3 setting
KEY1OVER
This is used to change the KEY1 and KEY2
priority.