FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 218 / 250

2
MU SETUP – SYSTEM menu
Submenu
Parameter Default Setting Range Refer to
REF OUT
PHS
H PHS
1080/60i, 1080/59.94i
0
-1094 to 1094
15-3-1
1080/50i -1314 to 1314
1080/24p, 1080/23.98p,
1080/24PsF, 1080/23.98PsF
-1369 to 1369
720/59.94p, 720/60p -819 to 819
720/50p -984 to 984
NTSC -852 to 852
PAL -858 to 858
V PHS 0 -100 to 100
INIT (Turn F6 to select value and press F6 to initialize all or
the selected parameters.)
CUR CUR, SYS, ALL 15-6
SWITCH TIMING FIELD FIELD, ODD, EVEN 15-3-2
MU SETUP - INPUT menu
Submenu
Parameter Default Setting Range Refer to
SIGNAL
NAME
SIGNAL BLACK
BLACK, 01-28, STILL1-STILL6, MATT1,
MATT2, WHITE, DVE
5-1-5
RENAME 0 0-8, CANCEL
CHANGE BIG BIG, SMALL, SYMBOL, NUMBER
CHARA
CHANGE=BIG - 'A' - 'Z'
CHANGE=SMALL - 'a' - 'z'
CHANGE=SYMBOL - Symbols
CHANGE=NUMBER - '0' - '9'
PNL EN
If IN01-IN28 or
STILL1-STILL6 is
selected for SIGNAL.
OFF OFF, ON
5-1-7
PNLSEL BLACK BLACK, AUX7-10, MATT1, MATT2
SIDE
PNLPOS
0
Setting range varies by operational signal
format.
MU SETUP - OUTPUT (1/2)-(2/2) menu
Submenu
Parameter Default Setting Range Refer to
SAFETY AREA (See section 15-3-4. Safety Area Markers.)
SF MODE
FIXED FIXED, VAR 15-3-4
CLEAN OUT
M/E1 ON
OFF, ON
5-5-3
M/E2 ON
KEY OUT
A ME1PGM
ME1PGM, ME1PST, ME1 A, ME1 B
ME1KEY1, ME1KEY2, ME2PGM,
ME2PST, ME2 A, ME2 B ME2KEY1,
ME2KEY2, D KEY1, D KEY2, D KEY3, D
KEY4, M2 KEY
B ME2PGM
MU SETUP - MODE menu
Submenu
Parameter Default Setting Range Refer to
TRANS
CONTROL
M/E2 REG REG, ABS
6-9-3
M/E2 REG REG, ABS
AUTO TAKE PAUSE PAUSE, CUT, RETURN 6-9-5
FADER MIX MIX, CUT 6-9-6
KEYER MODE
KEY LINK OFF OFF, ON 5-6-6
GAIN TYPE1 TYPE1, TYPE2
4-7-2,
5-7
SET INPUT INPUT, KEYER
EV-RCL MODE
M/E1 TYPE_P TYPE_P, TYPE_A
12-3
M/E2 TYPE_P TYPE_P, TYPE_A