FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 109 / 250

95
7. LINE DVE
LINE DVE is a setting that applies DVE effects to an individual bus and uses reduce, enlarge,
rotation, lighting, and other operations to allow modification of the video for that bus. It can also
apply the effects to the PGM, PST, KEY1, KEY2 and KEY3 buses of M/E1 and M/E2. There are two
setting methods. Under one method, the LINE DVE ON/OFF function is assigned to one bus
button; under the other, the LINE DVE ON/OFF function is assigned to a USER button. This
chapter explains the LINE DVE settings using actual examples of operation.
7-1. Using the Bus Button
7-1-1. Setting the LINE DVE ON/OFF Function Button
Here, the LINE DVE ON/OFF function will be assigned to the bus button 10.

Press the OU SETUP button in the menu section to open the OU SETUP top menu.

Select 1 BUS CONTROL, and press the DOWN button to open the OU SETUP - BUS
CONTROL menu.

Using the BUTTON item, select the button to which the function is to be assigned. (In this
example, 1 is selected.) Using the SIGNAL item, select L_DVE. When bus button 1 is
pressed, the corresponding bus is set to LINE DVE.
IMPORTANT
When this function is assigned to a bus button, signals cannot be assigned to that
button.
M/E2 bus
M/E1 bus
AUX/KEY bus
LINE DVE ON/OFF button
When the button light is turned on, only the lighted bus is
set to LINE DVE.
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
16 15 14 13 12 11 10 9 8 7 5 6 4 3 2 1
M/E1 MATT 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2
222
1
M/E1 MATT 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
MATT 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
M/E 1
M/E 2
VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1
VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1 VTR1
MATT
MATT
AUX/KEY
OU SETUP BUS CONTROL(1/2)
1
2
3
4
5
BUTTON
1
SIGNAL
L_DVE
LINE DVE
IN02
IN03
IN04
IN05
NAME
LINE DVE INHIBIT
OFF
ENABLE
OFF
L_DVE
IN02
IN03
IN04
IN05
1 OFF
OFF
OFF
OFF
OFF