FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 96 / 250

82
Patterns used in other transitions are also selected in the same way.
IMPORTANT
Note that only one WIPE pattern can be selected at a time, and so if the WIPE pattern
is changed in another transition, the WIPE pattern in the previously-selected transition
is also changed. Also, because the number of available simultaneous channels is
predetermined for the DVE pattern (refer to section 6-9-8. "DVE patterns and number
of channels"), when a setting is made that exceeds the number of channels used, the
WIPE button does not light up. In this case, make the settings after canceling the bus
that was already assigned to the DVE. The 2-channel DVE patterns designated by
pattern numbers 200 to 219 can be used in the background, but that cannot be used
with a key.

Transition Type Auto Change
If the switcher is changed to EDIT mode (by selecting EDIT for the BUTTON CTRL item in
the OU SETUP-MODE(1/2) menu), the transition type is automatically changed to WIPE or
DVE by selecting a pattern button.
6-6-2. Pattern Confirmation
The currently selected pattern is displayed above the pattern icon in the WIPE PATTERN
menu. The transition selected above the pattern icon (BKGD, KEY1, KEY2, and KEY3) is
displayed.
The following patterns are selected in the example above.
BKGD pattern:
No. 120
KEY1 pattern (user pattern): No. 401
KEY2 pattern:
No. 120
Once a pattern is assigned to a transition, that pattern is applied until it is changed. Even
when the transition type is changed to MIX, once the setting is returned to WIPE (DVE), the
previous patterns are applied.
Turn F6 to display another group.
The pattern block display in the
transition section is also switched at
the same time.
Turning F1 - F5 enables display
(storage) of different patterns.
WIPE PATTERN SELECT
120 121
WIPE
002 003 401
LIST
No.
1
BKGD
KEY2 KEY1
WIPE PATTERN SELECT
120 121
WIPE
002 003 401
LIST
No.
1
BKGD
KEY2 KEY1