43
5-1-7. Adding Side Panel Images
Side panel images can be added to the background video only when the primary inputs (IN01
to IN28) or the stills (STILL1 to STILL6) are assigned to the background.
Note that the side panel feature does not support all available signal standards. See the table
below.
Side panel
supported
: 1080/59.94i,
1080/60i,
720/59.94p, 720/60p
Side panel
not
supported:
1080/23.98p, 1080/24p, 1080/50i
1080/23.98PsF, 1080/24PsF
720/50p
NTSC, PAL
Open the MU SETUP - INPUT menu.
Select a background signal to which the side panel image is added at the SIGNAL item.
Change the SIDE PNL EN item to ON.
Select a source signal used for the side panel image at the PNLSEL item.
Adjust side panel width at the SIDE PNLPOS item, if necessary.
Item
Description
Default
Setting Range
SIGNAL
Selects signal to which side
panel image is added.
-
IN01 to IN28,
STILL1 to STILL6
PNL EN
Enables/Disables side panel.
OFF
OFF, ON
PNLSEL
Selects source signal used for
side panel image.
BLACK
BLACK, AUX7 to 10, MATT1,
MATT2
SIDE PNLPOS Adjusts side panel width.
0
Setting range varies by
operational signal format.
IMPORTANT
Side panel images can be applied to the background bus (M/E bus), but not to keyer
buses or auxiliary buses.
MU SETUP
INPUT(2/2)
SIDE
PNLPOS
0
MU SETUP
INPUT(1/2)
BLACK
IN01
IN02
IN03
IN04
SIGNAL
IN01
RENAME
BLAK
IN01
IN02
IN03
IN04
CHANGE CHARA
IN05
IN06
IN07
IN08
IN09
IN05
IN06
IN07
STLL1
STLL2
PNL EN
ON
PNLSEL
BLACK
Summary of Contents for HVS-12ROUA
Page 25: ...11 Circuit Max voltage 40V External Device HVS 3800HS S Max load current 100mA...
Page 240: ......
Page 248: ......
