141
When DIRECT RECALL is enabled for the memory page:
Follow the procedure below if DIRECT RECALL in the EVENT PAGE menu is set to ON.
Refer to section 12-1."Specifying the Number of Pages" to open the memory page where the
event that you want to load is stored.
At this time, menu buttons in the menu section also go to lit green to indicate that their
settings will be loaded and the EVENT MEMORY RECALL menu will open. Press the number
button (0-9) to load the event.
EV-RCL MODE Setting
The button light indications in M/Es may be switched between the upper row and lower row In
some cases when recalling events in A/B bus mode. This happens because the EV-RCL MODE
is set to TYPE_P, which allows for avoiding "dummy swing of the fader" when recalling events in
A/B mode. To change the EV-RCL MODE setting, proceed as follows.
Press MU SETUP button to open the MU SETUP top menu.
Turn F1 to select 4 MODE. Then press F1 or the DOWN button to go to the MU SETUP -
MODE menu.
EV-RCL MODE setting
Description
TYPE_P
The dummy swing of the fader is
not required
whenever
recalling events.
TYPE_A
The dummy swing of the fader is
required
in some cases when
recalling events.
* The EV-RCL MODE setting is disabled when the BUS TYPE item in the OU SETUP - BUS
CONTROL menu is set to P/P.
12-4. Overwrite Protect / Data Delete
Press button with a stored data indication (lit green). When pressed, the button will go to
flashing orange indication and the EVENT MEMORY RECALL menu should be displayed.
To set overwrite protection to the button, turn F5 to set EVENT OVERWRITE to
DISBL(DISABLE).
To delete event data of the button, turn F6 to set EVENT MEMORY DELETE to ON, then
press F6. A "beep" sound will be heard and the memory button will go to unlit once setting
made or data delete is completed.
NOTE
When pressing a control, press it down lightly and release it within 1 sec. Note that if
you press and hold a control for more than 1 sec., related operation will be cancelled.
Summary of Contents for HVS-12ROUA
Page 25: ...11 Circuit Max voltage 40V External Device HVS 3800HS S Max load current 100mA...
Page 240: ......
Page 248: ......
