114
9-2. Effects Using DVE
9-2-1. WIPE Switchover in a Video Wall (LINE DVE)
The forced background function can be used to perform a WIPE transition in a Video Wall.
When using the forced background function, first assign the LINE DVE function to a bus
button.
Set the DVE function of the M/E2PGM (or M/E1PGM) bus to ON.
If the LINE DVE ON/OFF function has been set in a bus button, press the bus button
concerned to turn on the button light.
If the LINE DVE ON/OFF function of the PGM bus has been set in a USER button, press
the USER button concerned to turn on the button light.
Display the MODIFY menu.
<HVS-16/24OUA>
Press the
POS
button in the SYSTEM group of the menu section. The button lights up
orange, and the DVE MODIFY (1/8) menu appears. Now check that the DVE-PGM button
in the M/E1 section of the menu section is lighted up orange. If it is lighted up green, press
the DVE-PGM button to light it up orange.
<HVS-12ROUA>
Press the WIPE/DVE MODIFY button in the M/E2 (or M/E1) of the menu section. The
DVE MODIFY top menu will open. Turn F1 to select POS/SIZE, and then press F1 to
open the DVE-MODIFY(1/8) menu. If the DVE-PGM(7) button in the KEYPAD section is
lighted up orange. If it is lighted up green, press the DVE-PGM button to light it up orange.
Double-click the WIPE POS button at the side of the joystick. The DVE MODIFY (1/8)
menu is opened. Turn F3 below the X-Y parameter to reduce the size of the PGM image.
Move the joystick in any of the four directions (up, down, right, or left) to place the PGM
image to the desired position.
Press the DVE button for the PST bus while holding down the DVE button for the PGM
bus. The background changes to the DVE BKGD image. (The DVE background image
can be changed in the TRANSITION menu.)
Select the WIPE type for the BKGD transition, and then turn F5 to select the WIPE
pattern (No. 000 in the example below) on the menu screen. Either move the fader lever,
or press the AUTO button to execute the transition. The WIPE transition is executed in the
Video Wall. (This is also possible with a MIX transition.)
Change size
PGM image
PST image
Change position
DVE BKGD image
Video Wall
(PGM image)
Video Wall
(WIPE transition)
Video Wall
(PST image)
Summary of Contents for HVS-12ROUA
Page 25: ...11 Circuit Max voltage 40V External Device HVS 3800HS S Max load current 100mA...
Page 240: ......
Page 248: ......
