193
16-8. Upgrading DVE Card
The purpose of this chapter is to explain how to upgrade the DVE card (HVS-38DVE2D/3D)
installed in the HVS-3800HS/S. Hanabi series DVE cards hold five upgradeable firmware files;
three applied to hardware and two applied to software. By upgrading these firmware files, you
can add new features / facilities to your existing DVE card. New firmware files can also be
provided to improve or change existing operation or features of your DVE card.
IMPORTANT
Consult your FOR-A suppliers for details about upgrading DVE card. Do not turn the
power off or pull the card out during upgrade process. Unless it may damage your
DVE card.
16-8-1. Checking the DVE Card Version
Before upgrading your DVE card, use the procedure below to check the current version of
your DVE Card.
Press and hold down the FILE button. Turn F1 while holding down the FILE button to
select the file extension G*. Release the FILE button.
Press F4 for DVE1 (or F5 for DVE2). DVE status of the DVE card will pop up on the
screen as shown below. To close the pop-up window, press the same control again.
CPU: CPU Version
DSP: DSP Version
HARD1 to 3: Hardware Version
FILE(1/2)
SELECT
1
SEND
DVE1/2
TYPE
"G*"
PM******.GCP
PM******.GDS
PM******.GF1
PM******.GF2
PM******.GF3
DVE1
STATUS
DVE2
STATUS
PC CARD => MU/OU
DVE1 STATUS
CPU:10.05 DSP:06
HARD1: 03 2: 04 3: 01
Summary of Contents for HVS-12ROUA
Page 25: ...11 Circuit Max voltage 40V External Device HVS 3800HS S Max load current 100mA...
Page 240: ......
Page 248: ......
