FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 221 / 250

5
OU SETUP - FADER (1/2)-
（
2/2
）
menu
Submenu Parameter Default Setting Range Refer to
M/E1 OFFSET
M/E2 OFFSET
LOW 1.00 0.00~2.00
6-9-3
HIGH 1.00 0.00~2.00
M/E1 TIE, M/E2 TIE OFF ON, OFF 6-5
FADER
INSENSITIVE
SELECT 0(M/E1) 0(M/E1), 1(M/E2)
6-9-4
SET IN IN, OUT
ENABLE OFF OFF, ON
IN 0.0
0.0 - 100.0
OUT 100.0 0.0 - 100.0
OU SETUP - NETWORK menu
Submenu
Parameter Default Setting Range Refer to
ARCNET ID 1 1-255
16-6-1 CTRL MU ID 250 1-255
ACTIVE MU ID - 1-255
1-3. FUNCTION Menu
HVS-16/24OUA
FUNCTION - TOP menu (FUNC button)
Submenu
Description
1. DVE SETUP DVE operational settings
2.GPI/TALLY Sets GPI input / output and tally assignments.
3. EDITOR Editor control
4. GMATT Sets up Gradation Matt signals
5. COLOR CORR Proc Amp, Signal Clip and Color Correction settings (Optional HVS-38CC required.)
6. ANCILLARY Ancillary data settings
7. VTR VTR control
8. ROUTER Router control
9. MULTIVIEW Multiviewer control (option) (*1)
10. UC/DC Up-converter and down converter control (option) (*2)
11. SS/AM Still store and moving image control (option) (*3)
12. AUX LINK AUX LINK settings
13. TSL TALLY TSL tally setings
Parameter Description
SELECT Selects submenus (Press F1 or the DOWN button to select submenus).
FUNCTION sub menus are accessed from the top menu. It is not allowed to move between sub menus
(*1)(*2)(*3) For menu details, see the separate manual of each option.
HVS-12OUA
FUNCTION - TOP menu (FUNC button)
Submenu
Description
1.STILL Still Store operation (See Appendix 1-5. STILL STORE menu.)
2.MATT Matt settings (See Appendix 1-4. Matt menu.)
3. DVE SETUP DVE operational settings
4.GPI/TALLY Sets GPI input / output and tally assignments.
5. EDITOR Editor control
6. GMATT Sets up Gradation Matt signals
7. COLOR CORR Proc Amp, Signal Clip and Color Correction settings (Optional HVS-38CC required.)
8. ANCILLARY Ancillary data settings
9. VTR VTR control
10. ROUTER Router control
11. MULTIVIEW Multiviewer control (option) (*1)
12. UC/DC Up-converter and down converter control (option) (*2)
13. SS/AM Still store and moving image control (option) (*3)
14. AUX LINK AUX LINK settings
15. TSL TALLY TSL tally setings
Parameter Description
SELECT Selects submenus (Press F1 or the DOWN button to select submenus).
FUNCTION sub menus are accessed from the top menu. It is not allowed to move between sub menus
(*1)(*2)(*3) For menu details, see the separate manual of each option.