189
16-6-2. Ethernet
Multiple units can be configured to communicate via LAN (Ethernet 10BASE-T /
100BASE-TX) MU interface connection. Related settings must be made in the MU SETUP -
NETWORK menu.
Connecting the MU on LAN
Use the twisted pair, Category 5 (UTP) cable (straight- through type) to connect the MU to
LAN. If connecting the MU to a PC directly, use the cross-connect type cable.
IMPORTANT
You should consult your network administrator before connecting the MU to the LAN.
MU IP Address and Mask Settings
Turn F1 in the MU SETUP-NETWORK menu and press F1 or the DOWN button to open MU
SETUP – NETWORK menu.
Align the cursor with the IP ADDRESS or NET MASK line to make Ethernet connection
settings. Note that IP ADDRESS and NET MASK are default set as IP ADDRESS
192.168.1.100 and NET MASK 255.255.255.0. Change each setting only when necessary.
After the setting is made, press ENTER to confirm setting.
MU SETUP
NETWORK
192
255
168
255
1
255
100
0
IP ADDRESS
NETMASK
ARCNET
ID
250
Summary of Contents for HVS-12ROUA
Page 25: ...11 Circuit Max voltage 40V External Device HVS 3800HS S Max load current 100mA...
Page 240: ......
Page 248: ......
