FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 127 / 250

113
Item Description
FRAME
Number of frames used. Normally, set the number of available original images
(maximum: 36)
SPEED
Output time of one image. A higher value results in slower switching of animation
images. Frame based. Maximum: 32
POS-X/Y Sets where the animation logo is appeared in the monitor display.
IMPORTANT
If the animation cannot be displayed clearly, adjust the CLIP and GAIN for KEY3.
The animation source image files in JPEG or TARGA format saved in the CF card can be sent to
the STILL memories. Prepare 12 (maximum: 36) animation source image files named by
sequential numbers in JPEG or TARGA format.
 File format and file name
Available files are Jpeg (except JPEG2000 format) and Targa with sequential names of up to 8
characters.
Example: XXXXXX01.JPG to XXXXXX36.JPG
(Any alphanumeric characters can be used for "XXXXXX".)
Available pixel sizes vary by the operating Video Signal Format. (See the table below.) The
source files should be sent using the FILE menu and arranged as shown in the table below.
Sequential Array of the Source Files
Video Signal
Format
Available pixel size of the source
file (W x H)
01 02 03 04 05 06
07 08 09 10 11 12
1080 320 x 180
13 14 15 16 17 18 720 212 x 120
19 20 21 22 23 24 NTSC 120 x 80
25 26 27 28 29 30 PAL 120 x 94
31 32 33 34 35 36
 Sending the source files
 Refer to above to prepare the suitable source files and save the files to the CF card using
your PC, and then insert the card into the OU card slot.

Press the FILE button to open the FILE top menu. Turn F1 to select FILE=>OU/MU, and
press F1 or the DOWN button to open the menu.

Select JP* or TG* for the TYPE.

Select any one of the sequential source files under the SELECT item.

Select from STL1 L to STL4 L. For example, if you want to save the file to STILL1, select
STL1 L.

Press F3 under the SEND item. A "beep" sound will be heard and the source data starts to
be sent. When the data transmission has completed, a combined single file made form the
source data is automatically saved to the STILL memory.
NOTE
If the type of an image file is TARGA and it includes an alpha channel, alpha channel
data will be sent to the next STILL memory. For example, if a video is saved to STILL1,
the alpha channel of this video will be saved to STILL2.
Sending animation files